Inclinometers
Description:
Inclinometer Casing is suited to be installed in boreholes, piles, set into concrete or attached to structures. The casing serves as an access tube to guide a servo accelerometer based probe in the two orthogonal directions of measurement. Changes in the output of the probe caused by the deformation of the casing, is proportional to the sine of the angle of inclination of the long sensor axis from vertical.
Features:
- High precision, machined, guide grooves.
- Low spiral ≤0.005 Rad/3 m (≤0.3 deg./ 10ft)
- Meets or exceeds all applicable standards.
- Self aligning, water and grout tight couplings
- Integral coupling reduces assembly induced spiral by 50% over conventional separate coupling methods.
- Easy assembly
- 70mm (2.75in.) and 85mm (3.34 in.) OD sizes.
- Compatible with inductance, reed switch, magnetic, or mechanical settlement monitoring devices.
- Snap Seal and Glue & Snap integral flush couplings that minimize filed installation time.
- Telescopic, low temperature, impact and corrosion resistant ABS plastic.
- External key provides visual and tactile confirmation of proper installation.
 |
